NEWS: DigiTech ships RP1000 Integrated Effects Switching System
Whoa, check out the new DigiTech RP1000, which was announced in November and has just started shipping. It’s designed to do what a bunch of Boss GT-8 users stumbled upon a while ago, which is to integrate a floor effects processor within an amp rig so you can use the amp’s own preamp sounds, and colour them with the effects unit, so you’re not chained to the pedal’s preamp. A similar feature is included in the smokin’ hot TC Electronics G System, but that’s mega expensive while the new RP1000 is a lot lighter on the wallet – with a street price of about five hundred bucks ($US).
In the case of the Boss GT-8, which I used for a while, you had to use all sorts of special cables and hum filters to get the amp’s preamp into the effects loop of the GT-8 so it could be moved within patches. The GT-8 was never designed to be used this way, it was just a happy accident. But it seems that since the RP1000 is designed specifically to do this sort of stuff, they’ve tackled all the impedance mismatches and ground hum problems. It also takes things further by including separate loops for your amp’s preamp and a stomp box.
My only beef is that there doesn’t appear to be a way to switch amp channels, which would somewhat limit the usefulness of this unit – it would be a shame to have all your settings and effects stored on individual buttons for your clean, rhythm and lead sounds, but have to step on a separate amp channel switch as well. I could be wrong, perhaps the Looper Switch jack can be used for this purpose, but if so it’s not very clearly spelled out on the website.
Here’s the press release. DigiTech, a leading manufacturer of guitar, bass, and vocal processors, and a Harman International company (NYSE-HAR), is shipping it’s newest, highly anticipated RP1000 Integrated Effects Switching System.
The RP1000 sets itself apart from traditional multi-effects products featuring switchable stompbox and external amplifier loops that allow the RP1000 to easily integrate with external gear. “Guitar players use different brands and pieces of gear to create their personal tone, the RP1000′s loops and transparency is the only piece of gear of its type and allows them to do just that. I personally use an assortment of external pedals and an amp that defines my tone. Everybody I know has a different taste in amps and pedals, the RP1000 allows them to use their current setup while offering them more tonal choices” says Jason Lamb, DigiTech Marketing Manager.
The RP1000 targets live guitar players with 14 metal switches that controls both program changes, effects on/off, stompbox loop in/out, bank up/down, and the built in 20 second looper. The RP1000 can be used in two different control modes to switch up to 10 presets (preset mode) or 5 presets and 5 effects on/off (pedalboard mode).
For the tone purists, the RP1000′s internal Amp/Cabinet Bypass switch removes the RP1000′s internal amplifiers and cabinet effects from the signal chain leaving only stompboxes and effects.
The RP1000 has over 160 internal stompboxes, effects, amps and cabinets for nearly unlimited tonal options, USB 2×2 audio streaming along with Cubase LE4 all at the US MSRP of $699.95
For more information, visit their web site athttp://www.digitech.com/.